Perforation detection

Perfomaster

The Perfomaster provides the hardware and software to generate a controlled spark over, detect this and evaluate the spark over to produce a pulse signal. The pulse signal is available on the output connector and can be used for counting the detected spark-overs and thus perforations.
The miniaturised design of the Perfomaster contains the electrode as well as the high voltage source. It is powered by 24 V DC, so no high voltage cable is required. Electrodes are standard fitted with three special alloy emitter pins and are detachable for replacement or remote placement.

A status signal LED provides direct system information on the Perfomaster.

  • A green LED signals operation OK.
  • An intermittent red LED signals a perforation detected.

Supply voltage and output voltage setting to the Perfomaster can be provided in two ways:
1) directly form the machine f.e. PLC
2) with additional external control kit

Technical specifications
HousingABS/PTFE
Cablelow voltage cable, standard M12 connector
Input power24 V DC, <0,5 A
Emitter pinsspecial alloy
Max detection frequency25 Hz
SignalMulticolour LED: -Green, signal 'operation OK'
-Red, signal perforation detected
Signal outputOptocoupler
Control voltage0-10 V of 0-24 V
Ambient temperature0 - 55°C
Use circumstancesindustrial
Protection classificationIP 54
Looking for Perforation detection ?
© Arshad Electronics Private Limited
 
Desktop Site Back to top